-0,32%Search Results
IMPHY® 800 is a Nickel Chromium Iron alloy. It is used when resistance to oxidation, carburization and other type of high temperature corrosion is needed. IMPHY® 800 presents a good corrosion resistance to many aqueous media and a good resistance...
IMPHY® 800 H – HC are aNickel Chromium Iron alloy (Ti+Al). They are used when greater resistance to stress rupture and creep, especially for T > 816°C is required.
RESISTOHM is an alloy of 80% nickel and 20% chromium, making it the best known resistive alloy. It contains rare earth additions for increased resistance to oxidation, especially under conditions of frequent switching or wide temperature fluctuati...
RESISTOHM 60 is an excellent choice for heating elements operating at a temperature up to 1100°C.
RESISTOHM 40 has a high temperature coefficient. It allows it a speeder rise in temperature than the other NiCr.
Its high chromium percentage (30%) gives RESISTOHM 70 a very good life time in the furnace applications. Elements in RESISTOHM 70 have also a satisfactory life time when operating atmosphere is alternatively oxidizing and reducting.
Thermocouple type E has the highest EMF output per degree of all the referenced thermocouples.
IMPHY® NiCu28 is used for welding of copper-alloys IMPHY® NiCu32 or IMPHY® NiCu28Al, dissimilar welding between copper-alloys to nickel 200, or surfacing of steels. Similar to Copper-Nickel alloy IMPHY® NiCu32: – Very good strength corrosion...
Thermocouple Type J is frequently used for its low cost and high EMF. It can be used in oxidizing conditions up to 760°C. For higher temperatures, it is recommended to use large wire diameters.
Thermocouple Type K is the most commonly used thermocouple for measuring high temperatures, providing the widest operating temperature range from – 200 ° to + 1260 °C. It usually works in most applications, which include industrial heat treatments...
Thermocouple Type N has been developed with silicon content which provides: • Much longer life due to improved oxidation resistance of the negative NN leg • Longer exposure to high temperature without gradual drift EMF • Better reliability of EMF...
A 3 layer combination for PMCB, MCCB, Contactors, and other switchgear products.
A 3 layer combination for Copper/Stainless Steel/Nickel
A 3 layer combination for Fuses/ switchgear.
A 3 layer combination for bus bars.
A 3 layer combination for bus bars.
IMPHY® R series: have the same physical properties as the AS bimetals; however, the active member is harder. Their thermal deflection is highly stable.
IMPHY® AS series are bimetals available in a wide range of variants. What they have in common is a focus on a large temperature range.
IMPHY® 108SP series are thermally the most active bimetal types. They are principally used in case where large deflection is required. They are used when a moderate temperature change of a small active length is needed.
Bimetal components are used in the manufacture of bonded thermostat metal strips and can also be supplied.
IMPHY® SUPRA 50 is a FeNi soft magnetic alloy with saturation induction and high permeability. The high performance level and the chemical purity make this alloy particularly suitable for applications requiring high sensitivity and great accuracy....
IMPHY® SUPRA 40 is an iron-nickel soft magnetic alloys. IMPHY® SUPRA 40 offers a maximum saturation induction and high permeability with very good stampability.
PERMIMPHY is a 80% Nickel soft magnetic alloy. This crystalline alloy has a very high permeability, the lowest magnetic losses and is stress resistant. PERMIMPHY for Wafer fab production equipment shielding ? learn more
PERMIMPHY B is a nickel-iron soft magnetic. This alloy is suitable for laminations used for recording head cores.
PERMIMPHY LS is a FeNi soft magnetic. This alloy offers low decreasing magnetic properties under mechanical stress.
PERMIMPHY T is a nickel-iron soft magnetic alloy. It shows very high permeability and high purity dedicated to cores
IMPHY® AFK 1 is an iron-cobalt soft magnetic alloy with very high saturation induction and high ductility.
IMPHY AFK 18 is an iron-cobalt soft magnetic with very high saturation induction, High electrical resistivity and Magnetostriction λs = 25 ppm
IMPHY® AFK 502 is an Iron Co soft magnetic alloys. It shows exceptional properties including A very high saturation induction, A high resistivity Low loss and low coercitive field.
PHYTHERM 260 is suitable for cookware for induction cooking. The maximum working temperature is controlled by an adapted ferromagnetic alloy with a specific Curie point. Thanks to PHYTHERM 260, the magnetic base stops getting hotter once the Curie...
INVAR® M is an iron-nickel soft magnetic alloy with high permeability and with good resistivity
PHYTHERM 55 is an iron-nickel soft magnetic alloy
SATIMPHY is an iron-nickel soft magnetic alloy suitable for tape wound cores used in residual current devices, transformers…
CRYOPHY® is nickel-iron soft magnetic alloy suitable for magnetic shieldings at cryogenic temperature (typically 4K). It is a patented grade.
INVAR® is a FeNi36 alloy with s a very low coefficient of thermal expansion. The coefficient is of virtually zero at temperatures ranging from cryogenic to ambient. It has a very low coefficient of thermal expansion from -100°C to +200°C).This is ...
CRYOPHY® G23 a iron-manganese alloys with a good compromise between a low thermal expansion coefficient, good weldability and corrosion resistance at low temperature. This alloy is your solution for liquified gas transportation and storage.
INVAR® M93 is a specific INVAR®. It has a fully austenitic structure at all temperature. INVAR® M93 offers good ductility and toughness without any risk of embrittlement at cryogenic temperatures. Our INVAR® M93 is ready to meet the challenge of h...
IMPHY® DILVER is an iron-nickel-cobalt alloy. This alloy creates an homogeneous oxide layer needed to adhere metal to glass. This is possible thanks to an average CTE close to borosilicate glass).
IMPHY® N42 is an iron-nickel controlled expansion alloy suitable to glass sealing. This grade has anoptimal chemical composition to obtain hermetic seals.
IMPHY® N42E is an iron-nickel controlled expansion alloy especially recommended for etching.
IMPHY® N48 is an iron-nickel controlled expansion alloy suitable to soft glass sealing. IMPHY® N48 offers an optimal chemical composition to obtain hermetic seals.
IMPHY® N52 is an iron-nickel controlled expansion alloy suitable to soft glass sealing, with optimal chemical composition to obtain hermetic seals.
DURIMPHY is a 250 KSI tensile strength (kilo-pound per square inch) maraging steel. In addition to having a very high yield strength, our DURIMPHY offers a range of complementary properties/ Good formability and weldability, Hardening by heat tre...
PHYTIME is a 300 KSI tensile strength (kilo-pound per square inch) martensitic alloy ideal for hardening by ageing heat treatment. Its very outstanding mechanical and metallurgical properties make it particularly suitable when resistance to fatigu...
NEW !
Requesting a quote is easy!
To start, just click on the basket icon located at the bottom of each product box.
Worldwide
Business has never been so simple!
Aperam is committed to ensuring our customers have the materials they demand when and where they need them. That’s why we launched e-aperam, our intuitive, 24/7 online shopping platform. Not only can you place your next order for stainless steels in just three steps, you can also check the material’s mill certificate of quality, invoice and other order-related documents. Get started today!
go to e-aperam
Help Center
Our Help Center is a one-stop-shop for all your alloys questions. Download our grade portfolio to see all our available grades per family. Download the Rescal complete catalogue dedicated to wire and ribbons.