-0,32%Forms & Dimensions
Aperam alloys are designed and elaborated at our Imphy melt shop, which is renowned for its metallurgy expertise and in-depth knowledge on an array of applications.
Starting from an ingot, the product first undergoes melting and re-melting before being sent to our hot and cold rolling mills, where it is perfectly transformed into the final product.
Our alloys are available in all forms, including billets, ingots, bars, plates, slabs, wire rod, and cold rolled strips.
Bar (& Semis)
Values in mm
- Round: Diameter from 20mm to 400mm, ground, peeled or turned.
- Square: 15mm x 80mm to 400 x400mm, ground or fine ground.
- Flat: Thickness from 5 mm to 85 mm. Width from 15mm to 200mm, sand blasted.
- Billets: Diameter 130mm, 145mm, 160mm, 180mm, 200mm and 220mm. Length: from 4m to 7.5m.
- Straightened: Diameter from 1.50 mm to 16.00mm.
Bimetal
Values in mm
- Thermostatic bimetals are comprised of 2 or 3 metal layers cladded together. Thickness ranges from 0.10mm to 1.6mm and width from 1mm to 320mm (width and thickness are interdependent).
- Specific sizes and tolerances available on request.
Clad metal
Values in mm
- Clad material is comprised of two, three, five or even more layers of different metals.
- Thickness ranges from 0.11mm to 4.0mm and width from 5mm to 400mm. Layer ratios are 3% or more.
Cold rolled strip
Values in mm
- Thickness ranges from 0.05mm to 3mm and width from 3mm up to 680mm (width and thickness are interdependent).
- Specific sizes and tolerances available on request.
Plate & Sheet
Values in mm
- Thickness ranges from 3mm to 130mm. Available in widths of less than 3000mm, with the most common widths ranging between 1000 and 2800mm and a length greater than 12,000mm.
- Specific sizes and tolerances available on request.
Values in inches
- Round: Diameter from 0.7874″ to 15.748″, ground, peeled or turned.
- Square: 0.59″x 3.149″ to 15.748″x15.748″, ground or fine ground.
- Flat: Thickness from 0.1968″ to 3.3464″. Width from 0.59″ to 7.884″, sand blasted.
- Billets: Diameter 5.118″, 5.708″, 6.299″, 7.086″, 7.874″ and 7.866″. Length: from 157.48″ to 295″.
- Straightened: Diameter: from 0.059″ to 0.629″.
Values in inches
- Thermostatic bimetals are comprised of 2 or 3 metal layers cladded together. Thickness ranges from 0.003937″ to 0.0629″ and width from 0.03937″ to 14.76″ (width and thickness are interdependent).
- Specific sizes and tolerances available on request.
Values in inches
- Clad material is comprised of two, three, five or even more layers of different metals.
- Thickness ranges from 0.00433″ to 0.15748″ and width from 0.19685″ to 15.748″. Layer ratios are 3% or more.
Values in inches
- Thickness ranges from 0.002″ to 0.0118″ and width from 0.118″ up to 27.17″ (width and thickness are interdependent).
- Specific sizes and tolerances available on request.
Values in inches
- Thickness ranges from 0.118″ to 5.118″. Available in widths of less than 118.11″, with the most common widths ranging between 39.370” and 110.236” and a length greater than 472.440”.
- Specific sizes and tolerances available on request.
Wire rod
- Diameters ranging from 5.5mm to 21mm. Specific sizes and tolerances available on request.
Drawn & flat wire
- Drawn: Diameter from 0.10mm to 15mm . Specific sizes and tolerances available on request.
- Flat (ribbon): Width from 0.20 to 8.00mm. Thickness from 0.05 to 1.00mm
Magnetic core
- We produce customised magnetic cores in a wide range of permeability (from 200 to 1000000), materials (specially Nano-crystalline) and shapes (Oval, round and rectangular). Cores can be boxed or epoxy coated.
- We also offer cut-cores and subassemblies. Our cores find their application for filtering, current measurement and electrical safety.
Stamped part
- We have specialised knowledge in annealing of magnetic alloys together with state of the art stamping process. Our development capabilities are further enhanced through the integrated melting and rolling facilities of Aperam Alloys Imphy.
- Typical usage of our stamped parts are for torque sensor parts, motor stator and rotor parts, transformer E/I parts, shielding parts etc.
- Diameters ranging from 0.22″ to 0.83″. Specific sizes and tolerances available on request.
- Drawn: Diameter from 0.003937″ to 0.59″. Specific sizes and tolerances available on request.
- Flat (ribbon): Width from 0.078″ to 0.3149″. Thickness from 0.0019 to 0.3937″.
A product
for every application
Ready to start working on a tailor-made solution backed by an industry-leading commitment to long-term support? Our experts are standing by and ready to help you choose the right Aperam products for your specific needs.
Contact request
Whether it be a general question about Aperam or assistance choosing the right products for your project, our experts are standing by and ready to help